Energy Saving Renovation Design in Modern Architecture: A Case Study
DOI:
https://doi.org/10.53469/jpce.2024.06(10).02Keywords:
Design, Efficient building, Energy efficiencyAbstract
Improving the energy efficiency of existing buildings has been widely recognized as one of the key measures to mitigate our impact on the ecological environment, although it is also seen as a highly challenging task. This study focuses on the energy-saving renovation design practice of the Engineering Department Building at the Federal Institute of Technology Akre Campus, as a case study for in-depth analysis. During the research process, a comprehensive evaluation was conducted on the energy efficiency of various energy consuming equipment within the building. Unfortunately, it has been found that most of the components currently in use cannot efficiently meet the energy needs of buildings. The research conclusion emphasizes that developing and implementing renovation standards for existing buildings will bring significant benefits.
References
Atif, M.R and A.D Galasiu. (2003). Energy performance of daylight-linked auomatic lighting control system in large atrium space: report on two feild-monitored case studies. Energu and buildings, 35, 442-461.
Bax L, CruxenJ, and Komornicki L. (2013). Materials for energy efficiency buildings (Innovative chemistry for energy efficiency buildings). Smart cities stake holder platform.
Carthy H. (2011). Exsmples of deep energy savings in existing buildings. Vancouver: New building institute NBI.
Ebert H.P. (2015). Functional materials for enery efficiency buildings. EJP Web of conferences (p. 98). W'urzburg EPD Sciences.
Energy Sector Management Assistance Program, (2014). Improving energy efficiency in buildings. Retrieved from ESMAP: www.esmap.org/improving energy efficiency in buildings
Green Building Council of Australia. (2009) Green star Education VI. Standard practice benchmark Summary. Green star (1st ed) Green building council of Australia
Hyde R. Yeang K, Greonhout N, Barram F, Webster- Mannison M, Healey K and Halawa E. (2008). Exploring snergies with innovative green technologies for advanced renovation using a bioclamatic approach. 42nd Annual Conference of the Australian and New Zealand Architectural Science Association. Newcastle: ANZAScA.
International Energy Agency, (2000). Day lighting in buildings: A source book on day lighting system and components. IEA. Lawrence Berkeley National Laboratory (eetd.lbl.gov) as LBNL-47493.
Lee E.S, DiBartolomeo D.L, Selkowitz S.E. (1998). Thermsl and Daylighting performance of an automated venetian blind and lighting system in a full scale privae office. Energy and Buildings, 29, 47-63.
Li, D.H.W and J.C Lam. (2003). An investigation of day lighting performance and energy saving in a day light corridor. Energy and buildings, 35. 365-373.
Liu M and Hyde R., (2012). retrofits to improve energy efficiency of existing builings in the tetiary education sector: An investigation of current practice and implications. Building and Energ Conference, University of Sydney. Sydney.
Lukic p, Tamburic J and Stojic D. (2012). Energy efficiency of buildings with phase change material,. FACTA UNIVERSITATIS (architecture annd engineering).
Mier A, Olofsson T and Lamberts T. (2002). What is an efficientbuilding?Natonal de technologia do ambiente contruido, foz do iguacu-parana. Brazil: IX Encontro.
Noak L. and Wheelock C. (2010) Energy efficiency retrofits for commercial and public buildings ( Energy saving potential, Retrofit business cases, Financing Structures, Policy and regulatory factors, demand drivers and market forecast) Boulder: Pike research
Polly M, Gestwick M, Bianchi M, Anderson R, Horowitz S, Christensen C, and Judkoff R. (2011). A method of determining optimal residentialenergy efficiency retroffit packages Oak ridge. US department of energy.
Rubinstien F and Johnsons S. (1998). Advanced ighting program development (BG9702800) Final report. Berkeley Califonia pp28: Lawrence Berkeley National Laboratory.
Shnapp S, Sitja R. and Lausten J. (2013). What is deep renovation definition? Paris: Global building performance network.
Ullah, M.B and G. Lefebvre. (2000). Estimation of annual energy-saving contribution of an automated blinding sysyetm.
Umar U, Khamidi M, Shika S and Musa U. (2013). Towads building Energy efficiency for Developing Countries. Bonfring International Journal of Industrial Engineering and Management Sciences, 7.
United Nations Environment Programme, (2012). Theemission gap report. Retrieved from UNEP: www.unep.org/publicationebooks/emmissiongap2012
Urge-Vorstaz et al, (2012). Best practices for low carbon and energy buildings. GPBN.
Viorel Ungureanu, et al. (2013). Intergrated science for retroffiting buildings to reduce primary GHG emmission and cost. Central Europe towards sustainable Buildings, 3.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Faiz Ali Fahiz, Firoz Amiri, Munyoki Mwinzi
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
